Clutch Master Cylinder: Removal
WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- Drain brake fluid from clutch system.
- Remove clutch tube flare nut using a flare nut wrench.
- Remove reservoir hose.
- Remove the snap pin from the clevis pin and remove the clutch pedal from the clevis.
- Unscrew master cylinder assembly mounting nuts and reservoir tank bracket mounting nuts to remove master cylinder assembly from vehicle.
CAUTION:
Be careful not to splash brake fluid on painted areas; it may cause paint damage. If brake fluid is splashed on painted areas, wash it away with water immediately.