Removal Of Liquid Gasket

WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Be careful not to damage the mating surfaces.

Fig 1: Using Seal Cutter

Courtesy of NISSAN MOTOR CO., U.S.A.

After removing the mounting bolts and nuts, disconnect and remove the RTV Silicone Sealant using a seal cutter.

CAUTION: If for some unavoidable reason a tool such as a flat-blade screwdriver is used, be careful not to damage the mating surfaces.

In areas where the cutter is difficult to use, use a plastic hammer to lightly tap the gasket applied area.