LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Engine Controls - Self-Diagnostics) >> Diagnostic Tests >> DTC P0605: ECM >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2002 Nissan Xterra and 2002 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
  1. If using CONSULT-II, go to next step. If using generic scan tool, go to step  3 .
  2. Turn ignition on. Select SELF-DIAG RESULTS mode with CONSULT-II. Press ERASE. Perform DTC CONFIRMATION TEST  again. If 1st trip DTC is detected, replace ECM. If 1st trip DTC is not detected, test is complete.
  3. Turn ignition on. Select MODE 4 with scan tool. Press ERASE. Perform DTC CONFIRMATION TEST  again. If 1st trip DTC is detected, replace ECM. If 1st trip DTC is not detected, test is complete.