DTC Confirmation Test "A"
WARNING: This page is about a different car, the 2002 Nissan Xterra and 2002 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Before proceeding, ensure battery voltage is more than 10.5 volts with ignition on.
- Turn ignition on. Select DATA MONITOR mode with scan tool. Start engine and let it idle for at least 2 seconds.
- If 1st trip DTC is detected, go to appropriate DIAGNOSTIC PROCEDURE. If 1st trip DTC is not detected, turn ignition off, wait at least 5 seconds and go to DTC CONFIRMATION TEST "B" .