LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 69 (Engine Controls - Self-Diagnostics) >> Diagnostic Tests >> DTC P0402: EGRC-BPT Valve Function (2.4L) >> DTC Confirmation Test (Without CONSULT-II)

DTC Confirmation Test (Without CONSULT-II)

WARNING: This page is about a different car, the 2002 Nissan Xterra and 2002 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Use the following test to check overall function of EGRC-BPT valve. During this test, 1st trip DTC may not be confirmed.
  1. Install vacuum gauge in hose between EGR valve and EGRC-BPT valve. Raise drive wheels. Start engine. Shift transmission into 1st gear.
  2. Observe vacuum gauge while engine speed is at 2400-3200 RPM. Vacuum should be 0-5.91 in. Hg. If vacuum is not as specified, go to DIAGNOSTIC PROCEDURE  . If vacuum is specified, go to next step.
  3. Check for EGR valve lifting while increasing engine speed quickly from 2000-4000 RPM. EGR valve should lift, then go down without sticking when engine is returned to idle. If operation is not as specified, go to DIAGNOSTIC PROCEDURE  . If operation is as specified, system is okay at this time.
scientia non olet · About LEMON Manuals