DTC Confirmation Test "A"
WARNING: This page is about a different car, the 2002 Nissan Xterra and 2002 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform DTC Confirmation Test "A" first. If 1st trip DTC cannot be confirmed, turn ignition off and wait at least 10 seconds before performing next DTC confirmation test.
- Turn ignition on. Select DATA MONITOR mode with scan tool. Wait at least 6 seconds. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE . If 1st trip DTC is not detected, go to next step.
- Start engine and let it idle for at least 6 seconds. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE . If 1st trip DTC is not detected, turn ignition off, wait at least 5 seconds and go to DTC CONFIRMATION TEST "B" .