Possible Causes
WARNING: This page is about a different car, the 2002 Nissan Pathfinder and 2002 Infiniti QX4. However, it is still accessible from the selected car via links, so may be relevant.
Malfunction "A" will cause ECM to illuminate MIL and set DTC P0101 when high voltage from MAF sensor is sent to ECM under light load driving condition is detected.
Malfunction "B" will cause ECM to illuminate MIL and set DTC P0101 when low voltage from MAF sensor is sent to ECM under heavy load driving condition is detected.
Possible causes of malfunctions are:
- MAF sensor circuit open or shorted.
- Poor, loose, corroded or damaged terminal connections.
- Defective MAF sensor.
- Intake air leaks (malfunction "B" only).