Using Scan Tool
WARNING: This page is about a different car, the 2002 Infiniti QX4, 2001 Nissan Pathfinder, and 2001 Infiniti QX4. However, it is still accessible from the selected car via links, so may be relevant.
- If the ignition stays on after repair work, be sure to turn ignition off once. Wait at least 5 seconds and then turn ignition on, engine off.
- Perform TCM SELF-DIAGNOSTIC PROCEDURE . The engine warm-up step can be skipped when performing the diagnosis only to erase the DTC.
- Using scan tool, clear DTCs following scan tool manufacturer's instructions.