LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Disc Brakes) >> Removal & Installation >> Power Brake Unit >> Removal

Power Brake Unit: Removal

WARNING: This page is about a different car, the 2004 Nissan Altima, 2003 Nissan Altima, and 2002 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

Remove master cylinder. See MASTER CYLINDER  . Disconnect power brake unit push rod from brake pedal by removing clevis pin. Disconnect vacuum line from power brake unit. Remove power brake unit-to-firewall nuts. Remove power brake unit.

scientia non olet · About LEMON Manuals