Front Brake Caliper: Installation

WARNING: This page is about a different car, the 2004 Nissan Altima, 2003 Nissan Altima, and 2002 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: When installing the caliper assembly in the vehicle, wipe oil from the seating surface of the knuckle spindle washer and the mounting surface of the caliper assembly. The copper washer of the connecting bolt has to be replaced every time the fitting is disconnected. Correctly attach the brake hose to the projecting portion of the cylinder body.

To install, reverse removal procedure. Tighten caliper mounting bolts to specification. See TORQUE SPECIFICATIONS . Bleed hydraulic system. See BLEEDING BRAKE SYSTEM .