1. Check A/T Check Indicator Lamp
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Start the engine with selector lever in "P" position. Warm engine to normal operating temperature.
- Turn ignition switch "ON" and "OFF" at least twice, then leave it in the "OFF" position.
- Wait 10 seconds.
- Turn ignition switch "ON". (Do not start engine.)
- Does A/T CHECK indicator lamp come on for about 2 seconds?
Yes or No
- Yes : GO TO 2.
- NO : GO TO "A/T CHECK Indicator Lamp does not come on ".