OBD-II Self-Diagnosis
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- A/T self-diagnosis is performed by the TCM in combination with the ECM. The results can be read through the blinking pattern of the A/T CHECK indicator or the malfunction indicator lamp (MIL). Refer to the table on "SELF-DIAG RESULT MODE " for the indicator used to display each self-diagnostic result.
- The self-diagnostic results indicated by the MIL are automatically stored in both the ECM and TCM memories.
Always perform the procedure on "HOW TO ERASE DTC "to complete the repair and avoid unnecessary blinking of the MIL.
- For details of OBD-II, refer to "ON BOARD DIAGNOSTIC (OBD) SYSTEM ".
- Certain systems and components, especially those related to OBD, may use the new style slide-locking type harness connector.