LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 423 (Automatic Transaxle - Re5F22A) >> DTC U1000 Can Communication Line >> Diagnostic Procedure >> 2. Check CAN Communication Signals >> With Consult-II

With Consult-II

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "ON" and start engine.
  2. Select "CAN DIAG SUPPORT MNTR" in "DATA MONITOR" mode for "TRANSMISSION" with Consult-II.
    1. : Print out Consult-II screen, go to "CAN COMMUNICATION ".
scientia non olet · About LEMON Manuals