LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 423 (Automatic Transaxle - Re5F22A) >> DTC P0726 Engine Speed Input Circuit Performance >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "ON" and select "TRANSMISSION" with "DATA MONITOR" mode in Consult-II.
    Fig 1: Consult-II Display Screen
    G00778386Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Start engine.
  3. Drive vehicle and maintain the following conditions for at least 10 consecutive seconds.

    VHCL/S SE-A/T: 10 km/h (6 MPH) or more 

    ACCELE ANGLE: More than 10 % 

    SLCT LVR POSI: "D" position 

  4. If DTC is detected, go to "Diagnostic Procedure ".
scientia non olet · About LEMON Manuals