With Consult-II
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch "ON". (Do not start engine.)
- Select "TRANSMISSION" with "DATA MONITOR" mode in Consult-II.
- Start engine.
- Drive vehicle and maintain the following conditions for at least 15 minutes (Total). (It is not necessary to maintain continuously.)
VHCL SPEED SE-A/T: 40 km/h (25 MPH) or more SLCT LVR POSI: "D" position
- If DTC is detected, go to "Diagnostic Procedure ".