4. Check TCM Ground Circuit
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch to OFF position.
- Disconnect TCM harness connector.
- Check continuity between TCM harness connector F57 terminals 25(B), 48(B) and ground. Refer to
"WIRING DIAGRAM - AT - MAIN ".
Continuity should exist.
If OK, check harness for short to ground and short to power.
OK or NG
- OK : INSPECTION END
- NG : Repair open circuit or short to ground or short to power in harness or connectors.