1. Check Engine Start

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Park vehicle on flat surface.
Move selector lever to P position.
Turn ignition switch to OFF position.
Turn ignition switch to START position.
Is engine started?

Yes or No

Yes >> GO TO 2.
No >> Stop ROAD TEST. Mark the box on the DIAGNOSTIC WORKSHEET. Go to "ENGINE CANNOT BE STARTED IN P AND N POSITION ". Continue ROAD TEST.

Fig 1: Ensuring Engine Start In "P" & "N" Positions
Courtesy of NISSAN MOTOR CO., U.S.A.