LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 421 (Automatic Transaxle - Re4F04B) >> On Board Diagnostic System Description >> OBD-II Diagnostic Trouble Code (DTC) >> How To Erase DTC (with GST)

How To Erase DTC (with GST)

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 10 seconds and then turn it ON (engine stopped) again.
  2. Perform "TCM SELF-DIAGNOSTIC PROCEDURE (No Tools)". Refer to "TCM SELF-DIAGNOSTIC PROCEDURE (NO TOOLS) ". (The engine warm-up step can be skipped when performing the diagnosis only to erase the DTC.)
  3. Select Mode 4 with Generic Scan Tool (GST). For details, refer to "GENERIC SCAN TOOL (GST) FUNCTION ".
scientia non olet · About LEMON Manuals