With CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch to "ON" position. (Do not start engine.)
Select "DATA MONITOR" mode for "A/T" With CONSULT-II.
The "CAN COMM CIRCUIT" is detected.

Yes or No

Yes : Print out CONSULT-II screen, GO TO 2.
No : INSPECTION END

Fig 1: CONSULT-II Display Screen
Courtesy of NISSAN MOTOR CO., U.S.A.