LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 421 (Automatic Transaxle - Re4F04B) >> DTC Turbine Revolution Sensor >> Description >> Diagnostic Trouble Code (DTC) Confirmation Procedure >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine.
    Fig 1: CONSULT-II Display Screen
    G00776546Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Select "DATA MONITOR" mode for "A/T" With CONSULT-II.
  3. Drive vehicle under the following conditions:

    Selector lever in D, vehicle speed higher than 40 km/h (25 MPH), engine speed higher than 1,500 RPM, throttle opening greater than 1.0/8 of the full throttle position and driving for more than 5 seconds.

    Fig 2: CONSULT-II Display Screen
    G00776547Courtesy of NISSAN MOTOR CO., U.S.A.