With CONSULT-II
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch "ON" and select "SELF DIAGNOSIS" mode for A/T With CONSULT-II.
- Move selector lever to "R" position.
- Depress accelerator pedal (Full throttle position).
- Touch "ERASE".
- Turn ignition switch "OFF" position for 10 seconds.
Perform "DIAGNOSTIC TROUBLE CODE (DTC) CONFIRMATION PROCEDURE ".
Is the "CONT UNIT (EEP ROM)" displayed again?
- Yes : Replace TCM.
- No : INSPECTION END