LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 421 (Automatic Transaxle - Re4F04B) >> DTC Control Unit (EEP ROM) >> Description >> Diagnostic Trouble Code (DTC) Confirmation Procedure >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "ON" and select "DATA MONITOR" mode for A/T With CONSULT-II.
  2. Start engine.
    Fig 1: CONSULT-II Display Screen
    G00776559Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Run engine for at least 2 seconds at idle speed.
    Fig 2: CONSULT-II Display Screen
    G00776560Courtesy of NISSAN MOTOR CO., U.S.A.