LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 420 (Clutch) >> Clutch Master Cylinder >> Removal And Installation Of Clutch Master Cylinder >> Removal

Removal And Installation Of Clutch Master Cylinder: Removal

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the brake fluid from the clutch hydraulic system.
    CAUTION: Do not splash brake fluid on painted areas; it may cause paint damage. If brake fluid is splashed on painted areas, wash it away with water immediately.
  2. Remove clutch line using a flare nut wrench.
  3. Remove hose clamp and hose from clutch master cylinder.
  4. Remove snap pin from clevis pin, then remove clevis pin from push rod and clevis.
  5. Remove the clutch master cylinder nuts, then remove the clutch master cylinder from the vehicle.
scientia non olet · About LEMON Manuals