LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 418 (Engine Mechanical) >> Timing Chain TENSIONER >> Removal And Installation (Secondary Timing Chain TENSIONER Shoe) >> Removal

Removal And Installation (Secondary Timing Chain TENSIONER Shoe): Removal

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal and installation of the secondary timing chain tensioner requires removal of the front camshaft brackets. Refer to "REMOVAL ".
  1. Remove the timing chains (secondary). Refer to "REMOVAL ".
  2. Remove the secondary timing chain tensioner shoe by evenly prying at base of shoe with suitable tool as shown.
    Fig 1: Locating Secondary Timing Chain Tensioner Shoe
    G07152058Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals