LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 418 (Engine Mechanical) >> Drive Belts >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Installation is in the reverse order of removal.
    CAUTION:
    • Make sure belts are correctly engaged with the pulley groove.
    • Clean off any for oil and coolant on belts and each pulley groove.
  2. Adjust belt tension. Refer to DRIVE BELTS .
scientia non olet · About LEMON Manuals