LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 418 (Engine Mechanical) >> Cylinder Block >> How To Select Piston And Bearing >> How To Select Connecting Rod Bearings >> When Crankshaft and Connecting Rod are Reused

When Crankshaft and Connecting Rod are Reused

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure dimensions of the big end inner diameter of connecting rod and outer diameter of crankshaft pin individually.
  2. Confirm the big end inner diameter of connecting rod is within the standard value.
  3. Apply the measured dimension to the "CONNECTING ROD BEARING SELECTION TABLE ".
  4. Determine the grade of crankshaft pin diameter grade by comparing the measurement with the values under the crankshaft pin outer diameter of the "CONNECTING ROD BEARING SELECTION TABLE ".
scientia non olet · About LEMON Manuals