LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 418 (Engine Mechanical) >> Cylinder Block >> How To Select Piston And Bearing >> How To Select A Piston >> When Cylinder Block is Reused

When Cylinder Block is Reused

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the cylinder block bore inner diameter.
  2. Determine the bore grade by comparing the measurement with the values under the cylinder bore inner diameter of the "PISTON SELECTION TABLE ".
  3. Select the piston of the same grade.
Fig 1: Locating Piston Grade Number
G00877054Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals