Removal And Installation: Removal
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the grille top cover.
- Remove the fresh air duct.
- Disconnect the harness connector from the mass air flow sensor.
- Disconnect the tube clamp at the electric throttle control actuator.
- Remove air cleaner to electric throttle control actuator tube, air cleaner case (upper) with the mass air flow sensor attached.
- Remove mass air flow sensor from air cleaner case (upper), as necessary.CAUTION: Handle mass air flow sensor with care.
- Do not shock it.
- Do not disassemble it.
- Do not touch its sensor.
- Remove the air cleaner case (lower).
- Remove resonator in the fender, lifting left fender protector, as necessary.