LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 414 (Engine Control System - DTC) >> DTC P1217: Engine Over Temperature >> Diagnostic Procedure >> Procedure A >> 8. Check Cooling Fan Motor-2 Circuit-II

8. Check Cooling Fan Motor-2 Circuit-II

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check harness continuity between the following terminals.

    Cooling fan motor-2 terminal 1 and IPDM E/R terminal 13

    Cooling fan motor-2 terminal and IPDM E/R terminals 10, 14 Refer to WIRING DIAGRAM.

    1. Continuity should exist. 
  2. Also check harness for short to ground and short to power.

OK or NG 

  1. OK: GO TO 9.
  2. NG: Repair open circuit or short to ground or short to power in harness or connectors.
scientia non olet · About LEMON Manuals