With CONSULT-II
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition witch ON and wait at least 1 second.
- Select "DATA MONITOR" mode with CONSULT-II.
- Shift selector lever to D position (A/T models) or 1st position (M/T models), and wait at least 2 seconds.
- Turn ignition switch OFF, wait at least 10 seconds, and then turn ON.
- If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".