LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 413 (Engine Mechanical - 3.5L) >> Ignition Coil >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover, with power tool.
  2. Drain engine coolant. Refer to V6 .
  3. Disconnect the mass air flow sensor electrical connector and remove the air cleaner assembly and air intake tubes. Refer to Removal and Installation  .
  4. Remove the windshield wiper arms and motor assembly and the front cowl panel.
  5. Remove the intake manifold collector, gasket, and throttle body. Refer to Removal and Installation  ".
  6. Remove the six ignition coils.
scientia non olet · About LEMON Manuals