LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 413 (Engine Mechanical - 3.5L) >> Cylinder Head >> Inspection After Disassembly >> Valve Spring Dimensions And Valve Spring Pressure Load

Valve Spring Dimensions And Valve Spring Pressure Load

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

Check valve spring pressure at specified spring height.

  1. Standard : 196 N (20.0 kg, 44.1 lb) at height 37.0 mm (1.457 in) 
  2. Limit : More than 433 N (44.2 kg, 97.3 lb) at height 27.8 mm (1.094 in) 

If it is not within specifications, replace the spring.

Fig 1: Checking Valve Spring Dimensions & Valve Spring Pressure Load
G02110720Courtesy of NISSAN MOTOR CO., U.S.A.