Drive Plate Runout (A/T)

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

Runout (Total Indicator Reading):

Drive plate (A/T) : less than 0.15 mm (0.0059 in)

CAUTION:

The signal plate is built into the drive assembly. Be careful not to damage the signal plate, particularly the teeth.
Check the drive plate and signal plate for deformation or cracks.
Keep any magnetized objects away from the signal plate, particularly the teeth.

Fig 1: Checking Drive Plate Runout (1 Of 2)
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Checking Drive Plate Runout (2 Of 2)
Courtesy of NISSAN MOTOR CO., U.S.A.