Camshaft Cam Lobe Height

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

Measure camshaft cam lobe height as shown.
1. Standard cam lobe height - intake and exhaust : 44.865 - 44.055 mm (1.7763 - 1.7738 in)
2. Cam lobe wear limit : 0.2 mm (0.008 in)
If wear has reduced the lobe height below specifications, replace the camshaft.

Fig 1: Camshaft Cam Lobe Height
Courtesy of NISSAN MOTOR CO., U.S.A.