LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 412 (Engine Mechanical - 2.5L) >> Intake Manifold >> Removal and Installation >> Installation >> Tightening Intake Manifold Bolts and Nuts

Tightening Intake Manifold Bolts and Nuts

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: After tightening No. 5 retighten the No. 1 mounting bolt to specification.
Fig 1: Intake Manifold Assembly Tightening Sequence
G02110277Courtesy of NISSAN MOTOR CO., U.S.A.