LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 412 (Engine Mechanical - 2.5L) >> Drive Belts >> Removal and Installation of Auxiliary Drive Belt Auto-tensioner >> Removal

Removal and Installation of Auxiliary Drive Belt Auto-tensioner: Removal

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front RH engine side cover.
  2. Remove the auxiliary drive belt.
    • Keep the auto-tensioner pulley held back with a tool such as a short-length screwdriver.
  3. Remove the alternator. Refer to REMOVAL AND INSTALLATION .
  4. Remove the auxiliary drive belt auto-tensioner, with power tool.
scientia non olet · About LEMON Manuals