DTC P0105: Absolute Pressure Sensor: Notes

WARNING: This page is about a different car, the 2002 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before performing diagnostic procedure, follow testing procedure. See TESTING PROCEDURE under SELF-DIAGNOSTIC SYSTEM.

NOTE: Perform the following DTC confirmation tests in order. Check for first trip DTC after each DTC confirmation test is performed. If first trip DTC is set, go to appropriate DIAGNOSTIC PROCEDURE. If first trip DTC is not set, turn ignition off and wait at least 10 seconds before performing next DTC confirmation test.