DTC Confirmation Test

WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If DTC confirmation test has been previously performed, turn ignition off and wait at least 10 seconds before performing next DTC confirmation test.

NOTE: Before proceeding with testing, ensure battery voltage is greater than 11 volts at idle.

To set DTC, turn ignition on. Using scan tool, select DATA MONITOR. Start engine and let it idle for at least 8 seconds. If first trip DTC is detected, perform DIAGNOSTIC PROCEDURE .