DTC Confirmation Test "B"
WARNING: This page is about a different car, the 2002 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition on. Select DATA MONITOR mode with scan tool. Wait until engine coolant temperature is less than 194°F (90°C). Perform the following steps before engine coolant temperature reaches 194°F (90°C).
- Start engine. Hold vehicle speed at more than 43 MPH for 105 consecutive seconds. This can be accomplished in shop with drive wheels lifted or by driving vehicle.
- If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE . If 1st trip DTC is not detected, system is okay at this time.