LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Controls - Self-Diagnostics) >> Diagnostic Tests >> DTC P1444: EVAP Canister Purge Volume Control Solenoid Valve >> DTC Confirmation Test (Using CONSULT-II)

DTC Confirmation Test (Using CONSULT-II)

WARNING: This page is about a different car, the 2002 Nissan Maxima and 2002 Infiniti I35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine and warm to normal operating temperature.
  2. Turn ignition off and wait at least 10 seconds. Turn ignition on.
  3. Select PURG VOL CN/V P1444 of EVAPORATIVE SYSTEM in DTC WORK SUPPORT mode with CONSULT-II.
  4. Press START. Start engine and let it idle until TESTING on CONSULT-II changes to COMPLETED (it will take about 10 seconds).
  5. If TESTING is not displayed after 5 minutes, retry from step  2 .
  6. Press SELF-DIAG RESULTS. If NG is displayed, go to DIAGNOSTIC PROCEDURE  .
  7. If OK is displayed, system is okay at this time.
scientia non olet · About LEMON Manuals