Removal and Installation for Condenser: Installation
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Replace the O-rings of the high-pressure pipe and the high-pressure flexible hose with new ones, then apply compressor oil to them after installing them.
- When charging refrigerant, check for leaks.
- High-pressure flexible hose and pipe mounting bolt
- Tightening torque : 7.8 - 19.6 N.m (0.8 - 1.9 kg-m, 69 - 173 in-lb)
- Tightening torque : 5.0 - 6.79 N.m (0.51 - 0.69 kg-m, 45 - 60 in-lb)