LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 339 (Automatic Air Conditioning) >> Refrigerant Lines >> Removal and Installation for Compressor >> Removal

Removal and Installation for Compressor: Removal

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Discharge the refrigerant. Refer to "HFC-134a (R-134a) Service Procedure ".
  2. Remove the drive belt.

    Refer to DRIVE BELTS .

  3. Remove the coolant pipe bracket bolt.
  4. Remove compressor mounting stud.
  5. Disconnect the compressor connector.
  6. Remove the high-pressure flexible hose and low-pressure flexible hose.
    CAUTION: Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
  7. Remove the mounting bolts and nut from compressor using power tools.
scientia non olet · About LEMON Manuals