Removal and Installation for Compressor: Installation
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Replace the O-ring of the low-pressure flexible hose and high-pressure flexible hose with a new one, then apply compressor oil to it when installing it.
- When charging refrigerant, check for leaks.
- Compressor mounting bolts (rear side)
- Tightening torque : 56.9 - 65.7 N.m (5.8 - 6.7 kg-m, 42 - 48 ft-lb)
- Bolt mounting the compressor (front side)
- Tightening torque : 28.4 - 33.3 N.m (2.9 - 3.4 kg-m, 21 - 24 ft-lb)
- Nut mounting the compressor (front side)
- Tightening torque : 59.8 - 69.6 N.m (6.1 - 7.0 kg-m, 45 - 51 ft-lb)
- Bolt mounting the high- and low-pressure flexible hoses
- Tightening torque : 7.8 - 19.6 N.m (0.8 - 1.9 kg-m, 69 - 173 in-lb)
- Compressor mounting bolts (rear side)