LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 325 (Automatic Transmission Servicing) >> Removal & Installation >> Revolution Sensor >> Removal & Installation (2WD Models)

Removal & Installation (2WD Models)

WARNING: This page is about a different car, the 2004 Nissan Pathfinder and 2003 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove bolt and revolution sensor. See Figure .
  2. To install, reverse removal procedure. Install NEW "O" ring on revolution sensor. Tighten bolt to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals