LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 323 (Automatic Transmission Servicing) >> Removal & Installation >> Turbine Revolution Sensor >> Removal & Installation (RE4F04B)

Removal & Installation (RE4F04B)

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect turbine revolution sensor harness connector. See Figure .
  2. Remove bolt and turbine revolution sensor.
  3. To install, reverse removal procedure. Install NEW "O" ring on revolution sensor. Tighten bolt to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals