Draining & Refilling
WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- Warm transaxle to normal operating temperature.
- Stop engine.
- Remove drain plug, and allow fluid to drain. Reinstall drain plug. Tighten drain plug to specification. See TORQUE SPECIFICATIONS .
- Remove dipstick and add (same amount as drained) fluid through fill tube. See RECOMMENDED FLUIDS .
- Warm transaxle to normal operating temperature.
- Shift transaxle through all gears. Move gearshift lever to "P" position. Check fluid level. See CHECKING FLUID LEVELS . Add fluid as necessary.