Shock Absorber: Installation
WARNING: This page is about a different car, the 2004 Nissan Altima, 2003 Nissan Altima, and 2002 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. Tighten all nuts/bolts to specification. See TORQUE SPECIFICATIONS .
- Check wheel alignment. See WHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES in ADJUSTMENTS & INSPECTION.
NOTE:
Perform final tightening of shock absorber lower side (rubber bushing) under unladen conditions with tires on level ground.