Belt Adjustment
WARNING: This page is about a different car, the 2004 Nissan Altima, 2003 Nissan Altima, and 2002 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Models equipped with 4-cylinder engines use an automatic drive belt tensioner. Adjustment is not necessary.
BELT TENSION ADJUSTMENT (V6)
| Application | (1) Deflection - In. (mm) | ||||
|---|---|---|---|---|---|
| A/C Compressor & Generator | |||||
| New Belt | .15-.16 (3.7-4.1) | ||||
| Used Belt | |||||
| Limit | .28 (7.0) | ||||
| After Adjustment | .17-.18 (4.2-4.6) | ||||
| Power Steering Pump | |||||
| New Belt | .26-.28 (6.5-7.0) | ||||
| Used Belt | |||||
| Limit | .43 (11.0) | ||||
| After Adjustment | .29-.32 (7.3-8.0) | ||||
|
|||||