Stud Torque (Lower Ball Joint)
WARNING: This page is about a different car, the 2004 Nissan Pathfinder, 2003 Nissan Pathfinder, and 2002 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect ball joint from steering knuckle. Check ball joint using a pull gauge. Side-to-side torque should be 1.8-17.2 lbs. (0.8-7.8 kg). If not within specification, replace ball joint.
- With ball joint stud nut in place, check stud turning torque. Turning torque should be 4.3-43.4 INCH lbs. (5-50 kg-cm). If not within specification, replace ball joint.