LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 282 (Front Suspension System) >> Removal & Installation >> Front Suspension Member >> Removal

Front Suspension Member: Removal

WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front wheels. Remove the engine under cover and splash shields.
  2. Remove the transverse link from the front suspension member.
  3. Remove the front exhaust tube from the vehicle. Remove the power steering line bracket from the suspension member. Remove the mounting bolts on the lower side of the steering gear.
  4. Set a transmission jack on the suspension member, then remove mounting nuts from the suspension member. Remove the mounting bolts from the front suspension member pin stay on the vehicle body side.
  5. Remove the through bolts from the front and rear engine mounts.
  6. Lower the transmission jack slowly, then remove the suspension member from the vehicle. If necessary, remove the exhaust hanger bracket from the front suspension member.
scientia non olet · About LEMON Manuals